PCB Material Search

Data compiled from pcbdirectory.com

Selected Filters

Reset All
  • Type: Copper-clad
  • UL: Yes
  • Filters

    Material Type

    Loss Tangent (Df)

    Apply

    Dielectric Constant (Dk)

    Apply

    Decomposition Temperature (Td)

    Apply

    Glass Transition Temperature (Tg)

    Apply

    RoHS Compliant

    Product Image

    Isola Group - Tachyon 100G

    • Description: Ultra-Low Loss Laminate and Prepreg for High-Speed Digital Applications
    • Type: Copper-clad
    • Df: 0.0021
    • Td: 360 ˚C
    • Tg: 180 to 220 ˚C
    • Frequency: 2 to 10 GHz
    • UL: yes
    more info
    Product Image

    DuPont - AG182518RY

    • Type: Copper-clad
    • UL: Yes
    • Cte xy: 17 to 20 ppm/˚C
    • RoHS: Yes
    • Electrical strength: 275 - 310 V/µm
    • Flamibility: 94V-0
    • Material: Polyimide
    more info
    Product Image

    Nan Ya Plastics Corp - CEM-3-01HC

    • Type: Copper-clad
    • Td: 310 ˚C
    • Tg: 110 ± 5 ˚C
    • UL: yes
    • Halogen Free: yes
    • Dielectric breakdown: 40 kV
    • Flamibility: 94V0
    more info
    Product Image

    Isola Group - TerraGreen (RF/MW)

    • Type: Copper-clad
    • Dk: 3.45
    • Df: 0.0032
    • Td: 390 ˚C
    • Tg: 200 ˚C
    • Frequency: 2 to 10 GHz
    • UL: yes
    more info
    Product Image

    Kingboard Holdings Limited - KB-6165F

    • Type: Copper-clad
    • Td: 325 ˚C
    • Tg: 150 ˚C
    • Frequency: 0.1 to 1 GHz
    • UL: yes
    • Lead Free: yes
    • Halogen Free: yes
    more info
    Product Image

    DuPont - AC182500RY

    • Type: Copper-clad
    • Tg: 130 ˚C
    • UL: Yes
    • RoHS: Yes
    • Flamibility: 94V-0
    • Material: Polyimide
    • Peel strength: 1.2 (6 - 7) N/mm (lb/in)
    more info
    Product Image

    Isola Group - IS415

    • Type: Copper-clad
    • Td: 370 ˚C
    • Tg: 200 ˚C
    • Frequency: 1 to 10 GHz
    • UL: yes
    • Lead Free: yes
    • Arc resistance: 120 Sec
    more info
    Product Image

    Nan Ya Plastics Corp - CEM-3-98

    • Type: Copper-clad
    • Td: 310 ˚C
    • Tg: 130 ± 5 ˚C
    • UL: yes
    • Dielectric breakdown: 40 kV
    • Flamibility: V-0
    • Flexural strength: 300, 400 N/mm2
    more info
    Product Image

    Isola Group - I-TERA MT40 (RF/MW)

    • Description: Low-Loss Laminate for High-Speed RF/Microwave Printed Circuit Designs
    • Type: Copper-clad
    • Td: 360 ˚C
    • Tg: 200 to 205 ˚C
    • Frequency: 10 GHz
    • UL: yes
    • Lead Free: yes
    more info
    Product Image

    DuPont - TAH125012B

    • Type: Copper-clad
    • Tg: 200 ˚C
    • UL: Yes
    • Cte xy: 25 ppm/˚C
    • RoHS: Yes
    • Flamibility: 94V-0
    • Material: Polyimide
    more info

    How to Build Your PCB Stackup

    Many PCBs will not function properly without the right dielectric materials as these influence EMI, signal integrity, and power integrity. The other dimension to consider on many mass-produced products is cost, as material selection will be a major factor determining volume production expense. To start building your own PCB stackup, follow these steps:

    • Prioritize your specifications - All PCB laminate materials come with tradeoffs, requiring a balance among cost, dielectric properties, and thermal reliability. Start by determining the important specifications before selecting material sets and planning your PCB layer assignments.

    • Review materials datasheets - Once base materials are selected, review the material datasheets, consult a PCB design services firm, or consult a PCB manufacturer for more information on use cases and laminate thickessness for you selected material set.

    • Check with your fabricator - Before finalizing your stackup design, have the design reviewed by a competent fabrication house. Hyrid PCB stackups builds, HDI PCB materials, thin PTFE laminates, and metal-core or ceramics all require special processing during fabrication to ensure reliability.

    The typical stackup arrangement shown below illustrates the stackup design approach and layer assigments in many commercial products. In between each of the signal/plane layer groups, additional signal layers may be present as needed, often being used to route important high-speed signals or large copper pours for power routing.

    PCB material search




    Need a hand with a current or future PCB design project? Find out the difference our experts can make.


    Contact us today for more information.


        

    You may include a ZIP file with your request (25 MB maximum)


    Ready to work with NWES?
    Contact us today for a consultation.

    Contact Us Today

    Our Clients and Partners